Notice (8): file_put_contents(): Write of 272 bytes failed with errno=28 No space left on device [CORE/src/Log/Engine/FileLog.php, line 140]

Notice: file_put_contents() [function.file-put-contents]: Write of 1108 bytes failed with errno=28 No space left on device in /www/wwwroot/www.adminso.com/vendor/cakephp/cakephp/src/Log/Engine/FileLog.php on line 140
Notice (8): SplFileObject::fwrite() [<a href='https://secure.php.net/splfileobject.fwrite'>splfileobject.fwrite</a>]: Write of 5437 bytes failed with errno=28 No space left on device [CORE/src/Cache/Engine/FileEngine.php, line 141]

Notice: file_put_contents() [function.file-put-contents]: Write of 3153 bytes failed with errno=28 No space left on device in /www/wwwroot/www.adminso.com/vendor/cakephp/cakephp/src/Log/Engine/FileLog.php on line 140
Notice (8): unserialize() [<a href='https://secure.php.net/function.unserialize'>function.unserialize</a>]: Error at offset 90093 of 90101 bytes [APP/Controller/NewsController.php, line 5571]

Notice: file_put_contents() [function.file-put-contents]: Write of 2491 bytes failed with errno=28 No space left on device in /www/wwwroot/www.adminso.com/vendor/cakephp/cakephp/src/Log/Engine/FileLog.php on line 140
Notice (8): unserialize() [<a href='https://secure.php.net/function.unserialize'>function.unserialize</a>]: Error at offset 94197 of 94197 bytes [APP/Controller/NewsController.php, line 5571]

Notice: file_put_contents() [function.file-put-contents]: Write of 2491 bytes failed with errno=28 No space left on device in /www/wwwroot/www.adminso.com/vendor/cakephp/cakephp/src/Log/Engine/FileLog.php on line 140
在墨水中加入叶绿体?科学家开发出3D打印新方式 - 站长搜索
首页 > 资讯列表 > 科技资讯 >> 趣科技

在墨水中加入叶绿体?科学家开发出3D打印新方式

趣科技 2021-01-29 14:01:08 转载来源: 环球网

【综合报道】1月29日消息,据外媒报道,南加州大学的研究团队近日研发出一项新成果:通过在用于3D打印的墨水中加入叶绿体,使打印出的材料经光照后变得更坚固。据了解,研究团队从菠菜中提取出叶绿体,然后将这些叶绿体加入到一种用于3D打印的墨水中

【综合报道】1月29日消息,据外媒报道,南加州大学的研究团队近日研发出一项新成果:通过在用于3D打印的墨水中加入叶绿体,使打印出的材料经光照后变得更坚固。

据了解,研究团队从菠菜中提取出叶绿体,然后将这些叶绿体加入到一种用于3D打印的墨水中。随后,科研人员打印出的材料置于太阳光下。在这一过程中,材料会相应地产生纤维素,从而维持了材料的形态,使其变得更加坚固。

据该科研团队介绍,经过2到4小时的光照后,材料可比之前坚固6倍。值得一提的是,科学家还通过暴露材料的某些部分,来选择性地提高材料硬度。

该团队表示,未来相关厂商有望通过这种方式制作3D打印鞋垫。打印出的鞋垫可根据用户脚的形状定制,还可调节硬度。

标签: 水中 加入 叶绿体 科学家 开发出 3D 打印 新方式 方式


声明:本文内容来源自网络,文字、图片等素材版权属于原作者,平台转载素材出于传递更多信息,文章内容仅供参考与学习,切勿作为商业目的使用。如果侵害了您的合法权益,请您及时与我们联系,我们会在第一时间进行处理!我们尊重版权,也致力于保护版权,站搜网感谢您的分享!

站长搜索

http://www.adminso.com

Copyright @ 2007~2025 All Rights Reserved.

Powered By 站长搜索

打开手机扫描上面的二维码打开手机版


使用手机软件扫描微信二维码

关注我们可获取更多热点资讯

站长搜索目录系统技术支持